Info on this Section:


Use the form below to request information on our products.


Please call me
Please type your mailing address below if you would like to receive a literature package:



Lean Manufacturing Trailer

One World-Class Chassis does it all.

The Trailer with versatility by design, developed especially for the Lean Manufacturing Atmosphere.

Light-Weight and Agile.

The Falcon II Lean Manufacturing Trailer is a true cross breed of the two most widely used trailers in the Material-Handling Industry, plus modular in concept.

Modular Design

One chassis receives a host of superstructures, allowing complete and cost-effective adaptability for your ever- changing material handling requirements.

Manual Position Friendly

Simply by locking the tongue in the vertical position, the Falcon II Lean Manufacturing Trailer converts into a conventional caster-steer trailer, allowing operators to easily position loads where other trailers fear to tread.

Unsurpassed Tracking Ability

By utilizing the proven Peregrine Tracker Design, the Falcon II requires absolute minimal aisle and floor space for maneuvering.
Call us toll-free at 1-800-777-3433 for additional information on this and other products, like the successful Quad-Steer Tracker™ positive-tracking trailer. Our team of professionals will be happy to assist you in finding the precise solution to your material-handling requirements.





- back to top -

The dimensions and capacity of the Falcon II Lean Manufacturing Trailer are usually defined by the type of activity it will perform and the operating conditions. The specifications below do not limit the product's dimensions or capacity, and may be considered as a starting point for informational purposes.

Specification Minimum Maximum
Overall Deck Size:
30" x 40"
48" x 96"
1,000-4,000 lbs.
1,000-4,000 lbs.
Outside Turning Radius*
Min. Spacing Between Aisles*
Approx. Shipping Weight
250 lbs.
575 lbs.

*These figures are taken with steering at less than maximum, to ensure an operating margin. A three-unit train of 30" x 60" Falcon IIs will easily turn in and out of 5' main aisles with a 7' end aisle, within the turning limits of the tow vehicle. Contact Peregrine, Inc. for an evaluation of trailer requirements for any particular facility or aisle configuration.

Caster Specifications

Wheel Diameter Tread Width Capacity* Overall Height Swivel Lead
1 1/2"
7 1/2"
1 11/16"
9 1/2"
1 11/16"
2 1/2"
11 1/2"
1 5/8"

*Per caster. Rated for manual operation.

- back to top -

Click on the button below to view the brochure in PDF format (529 KB). Please contact us if you would like us to send you a hard copy of the brochure.


If the brochure doesn't open correctly when you click on the link above, please right-click HERE, select "Save target as..." and open the file once you have saved it in your hard disk drive.

- back to top -

Click on the thumbnails to enlarge the images.

- back to top -

The following two videos show the Falcon II's basic operation. Please contact us for additional information or if you would like us to send you a videotape or CD-ROM.

If the video file doesn't start playing when you click on one of the links above, please right-click the link, select "Save target as..." and open the file once you have saved it in your hard disk drive.

- back to top -


© Peregrine, Inc. 2003
Toll Free: (800) 777-3433   •   Phone: (402) 466-4011   •   Fax: (402) 466-1639